10 Gbps
1 Gbps 95/5 included
170 €
/ month
- BGP or static routing
- IPv4 and IPv6
- Redundant setup
- /30 IPv4 and /128 IPv6
- 1×10G LR or 2×10G LACP
- Inline DDoS protection
- 24/7 support
IP Transit
Connect your network to AS203446 with IPv4 and IPv6 transit on ports from 10G to 400G. We support BGP and static routing, with DDoS protection available on the same connection.
BGP or static routing
Use a full BGP table if you want to make your own routing decisions, or take a default route or static connection. You can connect at one of our network locations or reach us over a GRE tunnel from another site.
If you also need DDoS protection, we can filter traffic on the SMARTNET network before it reaches your port.
- Routing
- Full-table BGP, default route, static routing, IPv4 and IPv6.
- Connection
- Physical ports at SMARTNET PoPs or redundant GRE tunnels.
- Billing
- 95th-percentile billing with a defined included commit and burst capacity.
- Protection
- Optional inline DDoS mitigation, FlowSpec rules and custom ACLs.
- Operations
- 24/7 NOC contact.
IPv4 + IPv6
Dual-stack connectivity with BGP or static routing.
95/5 billing
95/5 billing with defined commit rates and burst capacity.
20 FlowSpec rules
Included for precise traffic filtering and incident response.
24/7 support
Our NOC handles routing faults and network incidents.
AS203446 connectivity
Traffic leaves AS203446 through several transit providers, internet exchanges and private peers. Redundancy is built into both the core and the edge of the network.
Tell us if your design needs BFD, multiple BGP sessions or a particular routing policy. We can also update prefix filters as your announced networks change.
Multiple upstreams
Separate transit connections and redundant edge routers.
Direct peering
Shorter paths to major content and access networks.
Multi-terabit capacity
Capacity for transit and DDoS mitigation.
Juniper and Cisco edge
Redundant core and edge routing.
Interfaces, routing and filtering
Interconnection & peering
Private interconnection
- Meta
- Hetzner
- Cloudflare
- myLoc / WIIT
- Equinix
- BiMajLink
Private and public peering
- Telefonica
- NetCologne
- Akamai
- Apple
- Netflix
- TikTok
- euNetworks
- Microsoft
- Fastly
- OVH
- DigitalOcean
- LWLcom
Frankfurt locations
Connect directly at Equinix FR5, FR7 or FR8, Colt Frankfurt or Cogent Frankfurt. We also reach Equinix FR4 and FR6 over metro fibre.
Data centre connections
Let us know which data centre you use so we can confirm whether a cross-connect or metro connection is available.
Physical PoP
SMARTNET routing and switching infrastructure on site.
Fiber-connected facility
Reachable through the Frankfurt metro footprint.
Interconnection
Private metro links between core and edge locations.
Port options
25 Gbps
2.5 Gbps 95/5 included
425 €
/ month
- BGP or static routing
- IPv4 and IPv6
- Redundant setup
- /30 IPv4 and /128 IPv6
- 1×25G LR or 2×25G LACP
- Inline DDoS protection
- 24/7 support
40 Gbps
4 Gbps 95/5 included
690 €
/ month
- BGP or static routing
- IPv4 and IPv6
- Redundant setup
- /30 IPv4 and /128 IPv6
- 1×40G LR or 2×40G LACP
- Inline DDoS protection
- 24/7 support
100 Gbps
10 Gbps 95/5 included
1,500 €
/ month
- BGP or static routing
- IPv4 and IPv6
- Redundant setup
- /30 IPv4 and /128 IPv6
- 1×100G LR or 2×100G LACP
- Inline DDoS protection
- 24/7 support
Setup and SLA
How long does installation take?
BGP can normally be configured within one business day after the port is ready. Cross-connect lead time is set by the data center or carrier.
SLA targets
- 0% packet loss target
- 99.5% availability
- Europe latency below 40 ms
- US East Coast below 100 ms
- US West Coast below 195 ms